[中报]熵基科技(301330):熵基科技股份有限公司2024年半年度报告英文版
|
时间：2024年09月19日 02:05:45 中财网 |
|
原标题:熵基科技:熵基科技股份有限公司2024年半年度报告英文版
ZKTECO CO., LTD.
2024 Half Year Report
Announcement No.: 2024-037
August 2024
Section I Important Notes, Contents and Definitions
The Board of Directors, the Board of Supervisors, directors, supervisors and senior managers guarantee that the information presented in this report is true, accurate and complete without any false records, misleading statements or material omissions, and will undertake individual and joint legal liabilities. The Company's legal representative, Jin Hairong, the person in charge of the accounting work, Wang Youwu, and the person in charge of accounting institution (accounting supervisor), Fang Li, hereby declare that the financial information in this report is true, accurate and complete.
All directors have attended the board meeting to review this report. The Company has elaborated in detail on the potential risk factors that may occur in the future in this report. Investors are advised to refer to the full text of this report and pay special attention to the content of "Section III Management Discussion and Analysis" - "X. Risks Faced by the Company and Countermeasures".
The Company will not distribute cash dividend, distribute bonus shares, or distribute shares from capital reserve during the current reporting period.
Table of Contents
Section I Important Notes, Contents and Definitions ........................................................................................... 2
Section II Company Profile and Key Financial Indicators .................................................................................. 7
Section III Management Discussion and Analysis .............................................................................................. 11
Section IV Corporate Governance ....................................................................................................................... 71
Section V Environmental and Social Responsibility ........................................................................................... 73
Section VI Significant Events................................................................................................................................ 76
Section VII Changes in Shares and Information about Shareholders .............................................................. 83
Section VIII Information of Preferred Shares .................................................................................................... 89
Section IX Bonds .................................................................................................................................................... 90
Section X Financial Report ................................................................................................................................... 91
Documents Available for Inspection
I. The original text of the 2024 Half Year Report signed by the Company's legal representative and stamped by the Company;
II. Financial statements affixed with official stamps and the signatures of the Company's legal representative, the person in charge of
the accounting work and the person in charge of accounting institution (accounting supervisor) of the Company.
III. All original copies of the Company's documents and the original drafts of the Company's announcements as disclosed on websites
designated by the CSRC during the reporting period.
Place for document inspection: Office of the Company's Board of Directors
Definitions
| Terms | Refers to | Definitions | | Company, the Company,
ZKTeco | Refers to | ZKTECO CO., LTD. | | ZKTeco Times | Refers to | Shenzhen ZKTeco Times Investment Co., Ltd., a controlling shareholder of the
Company | | LX Investment | Refers to | Dongguan LX Investment Partnership Enterprise (Limited Partnership), a
shareholder of the Company | | JYLX | Refers to | Shenzhen JYLX Consulting Enterprise (Limited Partnership), a shareholder of the
Company | | Guangdong Zkteco | Refers to | ZKTECO (GUANGDONG) CO., LTD, a wholly-owned subsidiary of the Company | | Shenzhen ZKTeco | Refers to | Shenzhen ZKTeco Biometric Identification Technology Co., Ltd., a wholly-owned
subsidiary of the Company | | Shenzhen Zhongjiang | Refers to | Shenzhen Zhongjiang Intelligent Technology Co., Ltd., a company which 51%
equity holding by the Company, currently in compulsory liquidation proceedings. | | XIAMEN ZKTECO | Refers to | XIAMEN ZKTECO CO., LTD., a wholly-owned subsidiary of the Company | | Zhongan Intelligent Control | Refers to | Shenzhen Zhongan Intelligent Control Technology Co., Ltd., previously a controlling
subsidiary of the Company, with its equity in the Company transferred in 2019 | | Zokon Industry | Refers to | Shenzhen Zokon Industry Development Co., Ltd. | | Articles of Association | Refers to | Articles of Association of ZKTECO CO., LTD. | | A shares | Refers to | RMB denominated ordinary shares | | RMB, RMB '0,000 | Refers to | RMB, RMB '0,000 | | Reporting Period | Refers to | January-June 2024 | | End of Reporting Period | Refers to | June 30, 2024 | | CV | Refers to | Computer Vision | | BioCV | Refers to | Biometrics & Computer Vision | | Biometrics | Refers to | A computer technology that utilizes the analysis of human biological characteristics
to distinguish biological organisms. It is used for personal identification by a close
combination of computer technology with high-tech methods such as optics,
acoustics, biosensors, and biostatistics, and utilizing the inherent physiological
characteristics of the human body (fingerprints, facial features, palm veins, iris, etc.)
or behavioral characteristics (sound, gait, etc.) | | Computer Vision | Refers to | Used to simulate biological vision using cameras, computers, and related equipment;
simulate human visual abilities, capture and process three-dimensional information
of the scene by using optical systems and image processing tools, understand and
command specific devices to execute decisions | | RF, RFID | Refers to | Radio Frequency Identification (RFID), a wireless communication technology that
can identify specific targets and read and write relevant data through radio signals
without establishing mechanical or optical contact between the identification system
and specific targets | | Internet of Things/IoT | Refers to | Used to connect any object to the network by using information sensing devices and
following agreed protocols. The object exchanges and communicates information
through information dissemination media to achieve intelligent recognition,
positioning, tracking, supervision, and other functions | | 2nd-Generation ID Card,
Resident ID Card | Refers to | 2nd-Generation Resident ID Card | | SMED | Refers to | Single Minute Exchange of Die, a process improvement method that minimizes the
product die exchange time, production startup time, or adjustment time of the die. It
can significantly shorten the time required for machine installation and die exchange
setting | | SaaS | Refers to | Software as a Service, a software application model that provides software services
through the Internet | | CTID | Refers to | Cyber Trusted Identity, an authoritative network identity certificate issued to
individuals by the "Internet+" trusted identity authentication platform (CTID
Platform) | | ZigBee | Refers to | A wireless network protocol for low speed short distance transmission | | IP65 | Refers to | A protection level for electrical equipment casings against foreign object intrusion,
which can completely prevent dust from entering and wash with water without any
harm | | PUSH | Refers to | The active push technology on the server side, enabling the timely transmission of
data updates, which is characterized by high efficiency and low terminal energy
consumption | | MRP Mode | Refers to | Material Requirement Planning, the process in which a production enterprise
gradually derives the production and procurement plans for the components, raw
materials, and other materials required for the production of the main product based
on the production plan, the structure of the main product, and the inventories
situation | | SAM | Refers to | Secure Access Module, a module used for encrypting and decrypting identity card
information | | SMT | Refers to | Surface Mount Technology, a circuit assembly technology used to install surface
mounted components without pins or with short leads on the surface of printed
circuit boards (PCBs) or other substrates, and then solder and assemble them through
methods such as reflow soldering or immersion soldering | | PCB | Refers to | Printed Circuit Board, a substrate used for assembling electronic components | | PCBA | Refers to | Printed Circuit Board Assembly, the process of soldering components onto a PCB
substrate to form a printed circuit board (PCB) | | asmag | Refers to | A professional industry media company under the Messe Frankfurt Exhibition
GmbH, aiming to provide market analysis, technical information, solution
evaluation, industry forecasting, etc. for practitioners in smart security, smart life,
smart transportation, smart buildings, IT communication, and networking | | AI | Refers to | Artificial Intelligence | | AIoT | Refers to | The Artificial Intelligence of Things | | IoT | Refers to | Internet of Things | | NB-IOT | Refers to | Narrow Band Internet of Things, NB-IoT | | Rebate | Refers to | The rebate the Company provides to dealers based on the rebate policy and the
completion of dealer performance | | SDK | Refers to | Software Development Kit | | OCR | Refers to | Optical character recognition, the process of electronic devices (such as scanners or
digital cameras) using image processing and pattern recognition techniques to
examine characters on images, bills, or certificates and translate them into computer
text | | WM | Refers to | Warehouse Management | | SAP | Refers to | System Applications and Products | | PDA | Refers to | Personal Digital Assistant | | AGV | Refers to | Automated Guided Vehicle | | BioCode | Refers to | Biometric feature code, converted from encrypted biometric features | | QR code | Refers to | Two-dimensional barcode format: Quick Response Code, which can quickly read
data | | Transformer | Refers to | Deep learning model based on attention mechanism |
Note:
1.If there is a discrepancy between the total count and the sum of the sub item values in any table of this Half Year Report, it is
due to rounding reasons.
2. This report has been prepared in both Chinese and English. Should there be any discrepancies or misunderstandings between
Section II Company Profile and Key Financial Indicators
I. Company Information
| Stock Abbreviation | ZKTECO | Stock code | 301330 | | Stock listing exchange | Shenzhen Stock Exchange | | | | Chinese name of the
Company | 熵基科技股份有限公司 | | | | Chinese abbreviation of the
Company (if any) | 熵基科技 | | | | English name of the Company
(if any) | ZKTECO CO., LTD. | | | | English abbreviation of the
Company (if any) | ZKTeco | | | | Legal representative of the
Company | Jin Hairong | | |
II. Contacts and Contact Information
| | Secretary of the board | Representative on securities matters | | Name | Guo Yanbo | Wang Jia | | Contact address | No.32, Pingshan Industrial Road,
Tangxia Town, Dongguan, Guangdong,
China | No.32, Pingshan Industrial Road,
Tangxia Town, Dongguan, Guangdong,
China | | Tel. | 0769-82618868 | 0769-82618868 | | Fax | 0769-82618848 | 0769-82618848 | | Email | [email protected] | [email protected] |
III. Other Information
1. Company's Contact Information
Whether the registered address, office address, postal code, website, email address, etc. of the Company changed during the reporting
period?
□ Applicable ?Not applicable
The registered address, office address, postal code, website, email address, etc. of the Company have not changed during the reporting
period, as detailed in the 2023 Annual Report.
2. Information Disclosure and Place of the Report
Whether the information disclosure and place of the report changed during the reporting period? □ Applicable ?Not applicable
The website and media name and website of the stock exchange where the Company disclosed its Half Year Report. The filing location
of the Company's Half Year Report remains unchanged during the reporting period, as detailed in the 2023 Annual Report.
3. Registration Change
Whether the registration changed during the reporting period? □ Applicable ?Not applicable
The Company's registration remained unchanged during the reporting period, as detailed in the 2023 Annual Report.
4. Other Relevant Information
Whether other relevant information changed during the reporting period? ?Applicable □ Not applicable
During the reporting period, due to the completion of the first attribution period of the Restricted Share Incentive Plan in 2022, the
registered capital of the Company was changed from RMB 193,039,666 to RMB 194,679,508. Please refer to the "Announcement on
Completing Industrial and Commercial Change Registration" (Announcement No. 2024-003) disclosed by the Company on January
24, 2024 for details.
IV. Main Accounting Data and Financial Indicators
Does the Company need to retroactively adjust or restate accounting data from previous years □ Yes ?No
| | Current reporting period | The same period last year | YoY change during the
reporting period | | Operating income (RMB) | 903,103,158.77 | 937,182,670.00 | -3.64% | | Net profit attributable to
shareholders of listed
companies (RMB) | 78,637,727.33 | 88,754,335.62 | -11.40% | | Net profit attributable to
shareholders of listed
companies after deducting
non-recurring profits and
losses (RMB) | 67,172,205.06 | 94,476,476.50 | -28.90% | | Net cash flows from operating
activities (RMB) | 66,632,321.85 | 130,730,027.12 | -49.03% | | Basic EPS (RMB/share) | 0.4070 | 0.4598 | -11.48% | | Diluted EPS (RMB/share) | 0.4050 | 0.4579 | -11.55% | | Weighted average return on
net assets | 2.42% | 2.85% | -0.43% | | | At the end of this reporting
period | At the end of 2023 | Increase or decrease at the
end of this reporting period
compared to the end of the
previous year | | Total assets (RMB) | 3,798,491,466.69 | 3,923,900,732.70 | -3.20% | | Net assets attributable to
shareholders of listed
companies (RMB) | 3,200,457,211.25 | 3,265,413,589.20 | -1.99% |
V. Differences in Accounting Data between Domestic and Foreign Accounting Standards 1. Differences in net profit and net assets in financial reports disclosed in accordance with international
accounting standards and Chinese accounting standards
□ Applicable ?Not applicable
During the reporting period, there were no differences in net profit and net assets between the financial reports disclosed in accordance
with international accounting standards and Chinese accounting standards. 2. Differences in net profit and net assets in financial reports disclosed in accordance with foreign accounting
standards and Chinese accounting standards
□ Applicable ?Not applicable
During the reporting period, there were no differences in net profit and net assets between the financial reports disclosed in accordance
with foreign accounting standards and Chinese accounting standards. VI. Items and Amounts of Non-recurring Gains and Losses
?Applicable □ Not applicable
Unit: RMB
| Item | Amount | Remarks | | Losses and gains from disposal of non-current assets
(including the offsetting portion of the provision for losses
from impairment of assets) | -143,955.56 | | | Government subsidies included in current profits and losses
(except those closely related to the normal business of the
Company, which are in line with national policies and
regulations, enjoyed according to determined standards,
and have a continuous impact on the Company's profits and
losses) | 5,030,462.88 | | | Profits and losses from fair value changes arising from the
holding of financial assets and financial liabilities by non-
financial enterprises, as well as the gains and losses arising
from the disposal of financial assets and financial liabilities
except for effective hedging business related to the normal
operation of the Company | 6,105,510.00 | Mainly due to investment income
and fair value changes generated
by financial products | | Capital occupancy fees charged to non-financial enterprises
included in current profits and losses | 21,195.11 | | | Reversal of the provision on receivables with impairment
test conducted on an individual basis | 170,000.00 | | | Other non-operating income and expenses other than the
above items | 1,468,131.14 | | | Less: income tax impact | 1,278,125.03 | | | Minority interest impact (after tax) | -92,303.73 | | | Total | 11,465,522.27 | |
Details of other profit and loss items that meet the definition of non-recurring profits and losses:
□ Applicable ?Not applicable
The Company has no specific situation of other profit and loss items that meet the definition of non-recurring profits and losses.
Description on defining the non-recurring profit and loss items listed in the "Explanatory Announcement for Information Disclosure
by Companies that Issue Securities to the Public No. 1 - Non-recurring Profits and Losses" as recurring profit and loss items
□ Applicable ?Not applicable
The Company has no situation where the non-recurring profit and loss items listed in the "Explanatory Announcement for Information
Disclosure by Companies that Issue Securities to the Public No. 1 - Non-recurring Profits and Losses" are defined as recurring profit
and loss items.
Section III Management Discussion and Analysis
I. Main Businesses Engaged by the Company During the Reporting Period (I) Basic situation of the Company's main businesses and products The Company is an international enterprise in the field of multimodal "Computer Vision and Biometrics" (BioCV), and is a
national high-tech enterprise specializing in providing smart entrance and exit management, smart identity verification, smart office
products, smart retail products and solutions. The Company is mainly committed to integrating core multimodal biometric technologies
such as fingerprints, palm veins, palmprints, facial features, finger veins, and iris with computer vision, radio frequency, IoT, cloud
computing and other technologies. It provides smart terminals, industry application software, and platforms with object detection,
identity recognition and verification functions to multiple fields such as commerce, transportation, finance, education, healthcare,
government affairs and retail.
Relying on the global ecosystem of R&D, manufacturing, and sales services, the Company actively deploys the field of smart
retail cloud services while deeply cultivating the three major business sectors of smart entrance and exit, smart identity verification,
and smart office, providing digital products and services for users in the public service field, enterprises, and personal users.
From the perspective of the main application scenarios of the product, the Company's main business during the reporting period
mainly covered three major areas: smart entrance and exit management, smart identity verification, and smart office.
The main business income obtained from the three major scenarios of the Company during the reporting period is as follows:
Unit: RMB '0,000
| Item | January-June 2024 | | January-June 2023 | | | | Amount | Proportion | Amount | Proportion | | I. Smart entrance and exit
management products | 69,918.32 | 77.75% | 68,498.68 | 73.34% | | II. Smart identity verification
products | 4,590.20 | 5.10% | 7,693.09 | 8.24% | | III. Smart office products | 15,421.29 | 17.15% | 17,199.26 | 18.42% | | Total | 89,929.81 | 100.00% | 93,391.03 | 100.00% |
1. Smart entrance and exit management
(1) Smart terminal products and functions
During the reporting period, the Company's smart terminal products for smart entrance and exit management mainly include
access control management, pedestrian channels, vehicle channels, security inspection products, intelligent videos, smart locks,
elevator control, charging piles, and self-service visitor services.
| Product
Category | Product
Name | Product Description | Product Image | | Access
control
products | Access
control | The access control is a smart terminal that
achieves single door access control
permission verification and logical judgment
through biometric information verification or
other verification methods. According to
different biometric verification methods, it
can be divided into fingerprint, facial, palm
vein, and palmprint recognition access
control integrated machines, equipped with
RFID cards, passwords, and other verification
methods. The device supports unified
management on the software platform.
During the reporting period, the Company
launched a new generation of multimodal
biometrics product zFace series, which is
equipped with wireless doorbells and visual
intercom functions, accelerating the
implementation of technology products. | | | | Access
controller | The access controller is a smart terminal used
to receive data from biometrics card readers,
radio frequency card readers, and access
control, and perform access permission
verification and logical judgment. It is mainly
used in large and medium-sized project
locations with a large number of access points
and high security requirements. Accessible
collection methods include facial features,
fingerprints, RFID cards, QR codes and
passwords. The device has professional
access control function and supports unified
management on the software platform.
The Company actively deploys advanced
access controllers and multiple-step
controllers and cabinet controllers for large
and medium-sized enterprises and public
sector applications. | | | | Rack
mounted
controller | The InBioP3000 series is an intelligent
recognition access controller launched by
ZKTeco, with four door and eight door
options available. It is used in conjunction
with the DM20 access control magic box. The
DM20 device at the front of the door only
requires one POE network cable to achieve
data transmission from the controller. At the
same time, power can be supplied to devices
such as the reader, electric lock, exit switch,
alarm, etc. through the DM20, without the
need for external power supply, resulting in
lower cost. The status of the controller and
door can be viewed in real time through the
device's own LED lights, PC, web, and
mobile devices, making installation,
debugging, and maintenance more
convenient. The device is designed according
to the 1U standard and adopts SGCC (hot-dip | | | Product
Category | Product
Name | Product Description | Product Image | | | | galvanized low carbon steel) processing
technology. The body is wear-resistant and
durable, compact and generous, with two
installation methods: wall mounted and rack
mounted. It is easy to install, manage and
maintain, making it an ideal choice for many
enterprises. This controller is designed
specifically for medium to large-scale
projects, covering various scenarios such as
factories, companies, schools, buildings,
office buildings, apartments, etc. | | | | | DM20 is an access controller magic box
launched by ZKTeco, which is used in
conjunction with the InBioP3000 series
controllers. The controller is connected to the
DM20 via a PoE network cable, automatically
assigning an IP address to the DM20 without
the need for any network configuration
settings, greatly reducing the workload of
debugging personnel and significantly
improving work efficiency. DM20 supports
the access of ZKTeco products such as card
readers, fingerprint readers, QR code readers,
exit switches, electric locks, etc., and has
expanded auxiliary input and output
interfaces. DM20 provides direct power
supply to the connected devices without the
need for a separate external power source,
effectively reducing the construction and
wiring workload on the project site and
lowering project costs. | | | | Facial
recognition
card reader | Facial recognition card readers are mainly
used to collect and verify facial and card
information of personnel, and transmit the
comparison results to the access controller
through Wiegand for access permission
verification and logical judgment. Dual
verification can greatly improve the security
of the control area. With a 2 million pixel
binocular live detection camera, it accurately
resists various 2D and 3D simulation image
and model attacks. By outputting data through
Wiegand, most access controllers can be
directly upgraded to facial verification
methods, which has strong compatibility. | | | | RF card
reader
(including
national
security
card reader
and key
issuer) | The RF card reader is mainly used for the
collection and transmission of RFID
technologies and passwords, and can send the
collected data to the access controller for
comparison and verification. The data
information whose collection is supported
includes RFID cards, passwords, etc. | | | Product
Category | Product
Name | Product Description | Product Image | | Elevator
control | Elevator
controller | The elevator controller supports two modes of
online and offline operation, controlling a
maximum of 128 floors. It has multiple
verification methods such as face, fingerprint,
RFID card, QR code, etc. and can accurately
identify elevator user instructions without the
need for buttons, directly reaching the target
floor. In addition, it also supports seamless
integration with the visitor system, achieving
one code interconnection for visitors. | | | | Multimodal
acquisition
terminal | The multimodal acquisition terminal is an
inductive terminal used to collect information
such as the cardholder's face, fingerprint, QR
code, RFID card, password, etc., and transmit
it to the access controller and elevator
controller. It is used in conjunction with
software to achieve single or multiple door
access control permission verification. The
multimodal acquisition terminal is equipped
with a high-definition binocular camera,
configured with a facial liveness algorithm,
which can quickly capture faces and has
strong anti-counterfeiting ability. The
dustproof and waterproof level can reach
IP65. | | | Pedestrian
channel | Pedestrian
gate | The pedestrian gate is an intelligent device
used to control the entry and exit of personnel.
With the rapid development of digital
technology, the application of intelligent
pedestrian gates is becoming increasingly
widespread. At present, schools, high-end
residential areas, scenic spots, stations,
customs, airports, terminals, office buildings,
sports venues, and other places that require
pedestrian flow management, identity
recognition, and self-service fee management
are all provided with automated channel gates
instead of traditional manual ticket or
admission verification. The Company's
pedestrian gate products support the
integrated integration of multimodal
biometrics and radio frequency identification,
and support various infrared passage
detection functions for human and object,
enabling intelligent control and management
of the channel.
With the extension of the Company's core
technologies in video detection, image
recognition, behavior analysis, and feature
matching, and combined with the
characteristics of various scenarios in
pedestrian channels, the Company has
developed self-service settlement and passage
products and solutions that can meet the usage
needs of multiple scenarios such as libraries,
unmanned supermarkets, communities,
schools, airports, subways, and stations,
promoting convenient travel in the above
passage scenarios. The video passage
detection algorithm and device independently
developed by the Company use AI technology
to detect, alarm, and dissuade abnormal
behaviors such as tailgating, intrusion,
shoulder to shoulder, and hugging. This not | | | Product
Category | Product
Name | Product Description | Product Image | | | | only reduces the work pressure of staff, but
also greatly improves the safety of control and
the accuracy of passage data.
During the reporting period, the Company
promoted the integration and application of
technologies such as pedestrian gates,
multimodal recognition, holographic
projection and smart commercial display
according to the needs of high-end
commercial scenarios. | | | Vehicle
channel | License
plate
recognition
all-in-one
machine | The license plate recognition all-in-one
machine is mainly used to obtain and
recognize license plate information such as
license plate number, license plate color, and
license plate logo type. The Company's
license plate recognition all-in-one machine
adopts an integrated structure of license plate
recognition camera, control panel, display
screen, fill light, automatic barrier, etc. It can
realize voice broadcasting in local language
and display information such as license plate
numbers. The license plate recognition
parking lot management system can help car
owners to park automatically, support various
mobile payment functions, and can set
flexible and diverse charging rules to meet the
needs of different scenarios. | | | | Automatic
barrier | The automatic barrier can be independently
controlled to lift and lower the pole, or it can
be accessed through the parking lot
management system to lift and lower the pole.
The Company's gate is composed of a
reducer, motor, balancing device, chassis,
gate pole support, gate rod and other parts.
According to the application location of the
gate, its gate poles can be divided into straight
poles, 90° curved arm poles, fence poles, anti-
collision round poles, and other pole types.
The gate with license plate recognition all-in-
one machine is suitable for entrance and exit
management of parking lots in different
scenarios. | | | Product
Category | Product
Name | Product Description | Product Image | | | Charging
pile | New energy vehicle charging piles can be
fixed on the ground or walls, installed in
public buildings (buildings, shopping malls,
public parking lots, etc.), residential parking
lots, and dedicated charging stations to
provide charging and energy replenishment
services for electric vehicles and hybrid
vehicles. According to the output power of the
charging pile, it is generally divided into
various different power charging methods
such as AC slow charging, DC fast charging,
and overcharging to meet the charging needs
of new energy vehicles in different scenarios.
The Company's new energy vehicle charging
piles currently include 7kW AC slow
charging piles, 30kW/60kW/120kW/160kW
DC charging piles, and other series of
products. On this basis, the Company has
added 20kW and 240kW DC charging pile
series to improve the product array layout.
The main focus is on application scenarios
that require fast charging and energy
replenishment, such as administrative
agencies, enterprises and institutions,
industrial parks, shopping centers, scenic
spots, communities, public charging stations,
etc. It supports functions such as card swiping
charging, QR code scanning charging, mobile
payment, self-service, online monitoring,
cloud management, OTA remote upgrade, etc.
(integrated management and service of
charging and parking can be achieved with
the Company's smart parking business). | | | Security
inspection
products | Walk
through
metal
detector | Intelligent walk through metal detector is a
security inspection terminal that integrates
identity verification, personnel access and
metal detection. It is applied in public places
with high pedestrian flow, such as stations,
factories, public service departments and
large conferences, for personnel identity
verification, personnel access, and inspection
of metal items carried by personnel.
According to usage requirements, the product
integrates multiple functions such as metal
detection, thermal imaging temperature
measurement, real-time monitoring, channel
management, real name verification, and
environmental gas detection. It is equipped
with a 29 inch 21:9 ultra wide screen.
Through a brand new software UI
visualization platform and the integration of
multiple functions and visualized display of
data, the product has a wider range of
applications. | | | Product
Category | Product
Name | Product Description | Product Image | | | Intelligent
data walk
through
metal
detector | The intelligent data walk through metal
detector integrates weak signal detection
technology and intelligent classification
algorithm applications internally, classifying
and detecting metal items carried by passing
personnel. It integrates electronic products,
all-metal detection, and user-defined multiple
detection modes, making the product
versatile. Among them, in the electronic
product detection mode, the mobile phone can
be accurately detected after filtering out daily
metal items (such as keys, jewelry, belts,
cigarettes, lighters, glasses, stationery,
umbrellas, water bottles, and other small
metal objects). The all-metal mode is the
basic metal detection function of the product.
The user defined mode selects prohibited
metal items for pre-set product categories to
meet the detection needs of different
locations. The walk through metal detector is
suitable for various entry and exit security
inspection places, such as campuses,
examination places, public service
departments, public resource trading centers,
confidential entities, rail transit, scenic spots,
etc. | | | | Walk
through
metal
detector | The walk through metal detector is an ultra
high sensitivity metal classification detector.
Its internal detection system adopts the latest
eddy current signal detection and processing
technology developed by ZKTeco, forming a
multi-energy metal detection mode
combining non-ferrous metals and ferrous
metals. In the non-ferrous metal mode, the
product can accurately detect metal objects
carried by people with copper and aluminum
as the main materials. The detection accuracy
can reach and exceed the level of metal
detectors in the same category on the market.
It is widely suitable for manufacturers who
use copper and aluminum as raw materials for
production and processing, supervise and
eliminate personnel's carrying of such objects
in the premises, and protect the economic
interests of enterprises. The product can also
be freely switched in all-metal mode, giving
it a very high level of micro metal detection
capability. In this mode, it can accurately
detect other precision small and micro metal
items such as paper clips, 1 cent coins, pins,
etc., meeting the confidentiality requirements
of some high-level security inspection sites. | | | | X-Ray
Scanner | The X-Ray Scanner is a detection device used
to detect whether packages and other items
contain specific prohibited items. This series
of X-Ray Scanners integrates intelligent
recognition, people and bag association,
video capture, platform management and
other functions, which can better solve the
problems of missed inspections caused by
low concentration of security inspection
personnel and excessive security inspection
pressure during peak hours. This series of X-
Ray Scanners adopts new imaging | | | Product
Category | Product
Name | Product Description | Product Image | | | | technology, with high display image
resolution, stronger penetration and
resolution, and can quickly and effectively
detect various dangerous categories, drugs,
and high-density substances. It is widely used
in public service departments, embassies,
factories, schools, hospitals, sports centers,
exhibition halls, entertainment venues, and
other scenarios, and can be used for security
inspections of briefcases, postal parcels, hand
luggage, small luggage bags, etc. | | | Video
surveillance | Smart
camera
device | Intelligent video cameras have advanced
intelligent algorithms and can use intelligent
analysis functions to meet the entrance and
exit management for people and vehicles
(non-motor). They can also meet meet the
requirements of complex modern urban scene
deployment, as well as the increasingly wide
and in-depth analysis of target objects,
promoting the era of visual intelligence in
intelligent video. They are suitable for various
entrance and exit scenarios such as residential
areas, campuses and enterprises. | | | | Smart
video
recorder
device | Smart NVR (Network Video Recorder) is an
advanced security device that integrates high-
definition video recording, intelligent
analysis, and remote monitoring and
management. It supports multiple high-
definition video inputs, ensuring clear and
smooth images. Smart NVR also has cloud
connectivity capabilities, supporting remote
viewing and control through mobile APPs,
allowing for real-time monitoring of
monitoring dynamics anytime, anywhere. Its
efficient data storage and retrieval function
makes historical video playback more
convenient. Smart NVR is an indispensable
intelligent hub in modern security systems,
providing powerful technical support for
security protection. | | | Smart lock | Biometrics
smart lock | Smart locks are mainly used for opening and
closing control of doors in homes, hotels,
offices, and other areas. The Company's
biometrics smart lock products have the
function of extracting and comparing various
information such as fingerprints, faces, RFID
cards, etc. They can be managed through
software, smart speakers, or apps, and are
compatible with lock bodies in line with
national standards, American standards,
European standards, and Korean standards.
They support WiFi, NB IoT, ZigBee, and
Bluetooth communication methods. | | | Product
Category | Product
Name | Product Description | Product Image | | Visitor
Terminal | Intelligent
visitor
terminal | Cooperating with the One Card Solution
Cube Visitor Management System, it can
achieve "real name" + "real person" visitor
authentication; support CTID trusted identity
authentication; support mobile visitor
appointment, dual screen display, QR code
and OCR certificate scanning, barcode
printer, and other functions. SDKs can be
provided for customers to conduct secondary
development to meet the visitor management
needs of users in different industries. | |
（未完）
|
|
